{"id":4163891626073,"title":"New ! Shipepd from China - Donner Path Seeker ABY Switcher","handle":"donner-path-seeker-aby-switcher","description":"[TABS]\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cp\u003ePath Seeker is a dual-mode, fully-functional ABY switcher for amps\/pedalboards signal routing.\u003c\/p\u003e\n\u003cp\u003eYou can route your signal to either A\/B outputs, or feed it to A and B together.\u003c\/p\u003e\n\u003cp\u003eEach output channel has independent volume control for signal mixing, and a 0°-180° polarity toggle is for signal phase correction.\u003cbr\u003e\u003cbr\u003e1.Convenient compact size,Suitable for any music style\u003cbr\u003e2.Buffer bypass,LED indicator shows working state\u003cbr\u003e3.Two output channels with independent volume control \u003cbr\u003e4.Polarity reverse toggle (OUT B) for output signal phase correction \u003cbr\u003e5.DC 9V Adapter power supply. (plug polarity is positive on the barrel and negative in the center).(NOT INCLUDE)\u003c\/p\u003e\n\u003ch5\u003eSpecifications \u003c\/h5\u003e\n\u003cp\u003ePower Requirement: 9V DC center negative\u003cbr\u003eCurrent Consumption: 5mA\u003cbr\u003eDimensions: 132x64x45mm\u003cbr\u003eWeight: 235g\u003cbr\u003eMaterial: Aluminum alloy\u003c\/p\u003e\n\u003ch5\u003eConnections \u0026amp; Controls\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIN Jack: 1\/4” mono audio jack, for connecting instruments or other pedals.\u003c\/li\u003e\n\u003cli\u003e9V DC Jack: For power supply, use a 9-volt DC regulated by AC adapter, 500mA (plug polarity is positive on the barrel and negative in the center).\u003c\/li\u003e\n\u003cli\u003eOUT A\/B Jacks: 1\/4” mono audio jacks, for connecting amps or other devices.\u003c\/li\u003e\n\u003cli\u003eVOLA Knob: Controls the output volume of channel A (OUTA).\u003c\/li\u003e\n\u003cli\u003eVOL B Knob: Controls the output volume of channel B (OUT B).\u003c\/li\u003e\n\u003cli\u003eFootswitches: Use the footswitches to select an output channel or engage both output channels. This unit features two modes: A or B mode and A and B mode. In A or B mode, either LED will lit up to indicate current working channel; in A and B mode, all LEDs will lit up to indicate that all output channels are working.\u003c\/li\u003e\n\u003cli\u003eA OR B Footswitch: In A or B mode, tap the footswitch to toggle between A\/B output channels.\u003c\/li\u003e\n\u003cli\u003eA AND B Footswitch: Tap the footswitch to engage\/disengage A and B mode.\u003c\/li\u003e\n\u003cli\u003e0°-180° Toggle: Switch to 180° to invert the phase of channel B by 180° when necessary. When you split your signal to feed two amps, sometimes it may cause phase cancellations, resulting a thin, hollow sound. If so, inverting the phase will help. Switching to 0° to keep the signal neutral\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003e●Easy Controls\u003cbr\u003eThe Path Seeker features an easy-to-use interface: Each output channel has an independent volume control for detailed signal mixing, and LEDs under knobs indicate output channel working status. \u003cbr\u003e\u003cbr\u003e●2 Working Modes\u003cbr\u003eThis unit features two modes: A or B mode and A and B mode. You can select an output channel in A or B mode by tapping left footswitch, or select both in A and B mode by tapping right footswitch. \u003cbr\u003e\u003cbr\u003e●Phase Correction\u003cbr\u003eWhen you split your signal to two amps, sometimes it may cause phase cancellations, resulting a thin, hollow sound. If so, inverting the phase will help. In this case, you can use the toggle to invert the phase of channel B by 180° when necessary. \u003cbr\u003e\u003cbr\u003e●Carefully Selected Components\u003cbr\u003eThe Path Seeker is designed and built with carefully selected components to ensure best sound quality and road performance. The solid Aluminum-alloy chassis ensures touring reliability.\u003c\/p\u003e\n[\/TABS]","published_at":"2019-09-25T17:41:35+08:00","created_at":"2019-09-25T17:47:29+08:00","vendor":"Donner","type":"Guitar Effect Pedal","tags":[],"price":5999,"price_min":5999,"price_max":5999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30260918354009,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EC1218","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"New ! Shipepd from China - Donner Path Seeker ABY Switcher","public_title":null,"options":["Default Title"],"price":5999,"weight":420,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1384\/9629\/products\/1500-1500-2_4bd9ac64-db2e-4a83-9089-82c2d49760f7.jpg?v=1569404853","\/\/cdn.shopify.com\/s\/files\/1\/1384\/9629\/products\/1500-1500-1_a2c62af2-3f2c-4d3a-9e61-bb63645641d0.jpg?v=1569404857","\/\/cdn.shopify.com\/s\/files\/1\/1384\/9629\/products\/1500-1500-3_9938ec67-c4ee-4b60-bcce-a46568b3b7a9.jpg?v=1569404859"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1384\/9629\/products\/1500-1500-2_4bd9ac64-db2e-4a83-9089-82c2d49760f7.jpg?v=1569404853","options":["Title"],"content":"[TABS]\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cp\u003ePath Seeker is a dual-mode, fully-functional ABY switcher for amps\/pedalboards signal routing.\u003c\/p\u003e\n\u003cp\u003eYou can route your signal to either A\/B outputs, or feed it to A and B together.\u003c\/p\u003e\n\u003cp\u003eEach output channel has independent volume control for signal mixing, and a 0°-180° polarity toggle is for signal phase correction.\u003cbr\u003e\u003cbr\u003e1.Convenient compact size,Suitable for any music style\u003cbr\u003e2.Buffer bypass,LED indicator shows working state\u003cbr\u003e3.Two output channels with independent volume control \u003cbr\u003e4.Polarity reverse toggle (OUT B) for output signal phase correction \u003cbr\u003e5.DC 9V Adapter power supply. (plug polarity is positive on the barrel and negative in the center).(NOT INCLUDE)\u003c\/p\u003e\n\u003ch5\u003eSpecifications \u003c\/h5\u003e\n\u003cp\u003ePower Requirement: 9V DC center negative\u003cbr\u003eCurrent Consumption: 5mA\u003cbr\u003eDimensions: 132x64x45mm\u003cbr\u003eWeight: 235g\u003cbr\u003eMaterial: Aluminum alloy\u003c\/p\u003e\n\u003ch5\u003eConnections \u0026amp; Controls\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIN Jack: 1\/4” mono audio jack, for connecting instruments or other pedals.\u003c\/li\u003e\n\u003cli\u003e9V DC Jack: For power supply, use a 9-volt DC regulated by AC adapter, 500mA (plug polarity is positive on the barrel and negative in the center).\u003c\/li\u003e\n\u003cli\u003eOUT A\/B Jacks: 1\/4” mono audio jacks, for connecting amps or other devices.\u003c\/li\u003e\n\u003cli\u003eVOLA Knob: Controls the output volume of channel A (OUTA).\u003c\/li\u003e\n\u003cli\u003eVOL B Knob: Controls the output volume of channel B (OUT B).\u003c\/li\u003e\n\u003cli\u003eFootswitches: Use the footswitches to select an output channel or engage both output channels. This unit features two modes: A or B mode and A and B mode. In A or B mode, either LED will lit up to indicate current working channel; in A and B mode, all LEDs will lit up to indicate that all output channels are working.\u003c\/li\u003e\n\u003cli\u003eA OR B Footswitch: In A or B mode, tap the footswitch to toggle between A\/B output channels.\u003c\/li\u003e\n\u003cli\u003eA AND B Footswitch: Tap the footswitch to engage\/disengage A and B mode.\u003c\/li\u003e\n\u003cli\u003e0°-180° Toggle: Switch to 180° to invert the phase of channel B by 180° when necessary. When you split your signal to feed two amps, sometimes it may cause phase cancellations, resulting a thin, hollow sound. If so, inverting the phase will help. Switching to 0° to keep the signal neutral\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eOverview\u003c\/h5\u003e\n\u003cp\u003e●Easy Controls\u003cbr\u003eThe Path Seeker features an easy-to-use interface: Each output channel has an independent volume control for detailed signal mixing, and LEDs under knobs indicate output channel working status. \u003cbr\u003e\u003cbr\u003e●2 Working Modes\u003cbr\u003eThis unit features two modes: A or B mode and A and B mode. You can select an output channel in A or B mode by tapping left footswitch, or select both in A and B mode by tapping right footswitch. \u003cbr\u003e\u003cbr\u003e●Phase Correction\u003cbr\u003eWhen you split your signal to two amps, sometimes it may cause phase cancellations, resulting a thin, hollow sound. If so, inverting the phase will help. In this case, you can use the toggle to invert the phase of channel B by 180° when necessary. \u003cbr\u003e\u003cbr\u003e●Carefully Selected Components\u003cbr\u003eThe Path Seeker is designed and built with carefully selected components to ensure best sound quality and road performance. The solid Aluminum-alloy chassis ensures touring reliability.\u003c\/p\u003e\n[\/TABS]"}

New ! Shipepd from China - Donner Path Seeker ABY Switcher

Return Policy

Returns accepted if product not as described, buyer pays return shipping fee; or keep the product & agree refund with seller. View details

Seller Guarantees

Payment

  • apple pay
  • google pay
  • jcb
  • master
  • paypal
  • shopify pay
  • visa
Maximum quantity available reached.

Path Seeker is a dual-mode, fully-functional ABY switcher for amps/pedalboards signal routing.

You can route your signal to either A/B outputs, or feed it to A and B together.

Each output channel has independent volume control for signal mixing, and a 0°-180° polarity toggle is for signal phase correction.

1.Convenient compact size,Suitable for any music style
2.Buffer bypass,LED indicator shows working state
3.Two output channels with independent volume control
4.Polarity reverse toggle (OUT B) for output signal phase correction
5.DC 9V Adapter power supply. (plug polarity is positive on the barrel and negative in the center).(NOT INCLUDE)

Power Requirement: 9V DC center negative
Current Consumption: 5mA
Dimensions: 132x64x45mm
Weight: 235g
Material: Aluminum alloy

  • IN Jack: 1/4” mono audio jack, for connecting instruments or other pedals.
  • 9V DC Jack: For power supply, use a 9-volt DC regulated by AC adapter, 500mA (plug polarity is positive on the barrel and negative in the center).
  • OUT A/B Jacks: 1/4” mono audio jacks, for connecting amps or other devices.
  • VOLA Knob: Controls the output volume of channel A (OUTA).
  • VOL B Knob: Controls the output volume of channel B (OUT B).
  • Footswitches: Use the footswitches to select an output channel or engage both output channels. This unit features two modes: A or B mode and A and B mode. In A or B mode, either LED will lit up to indicate current working channel; in A and B mode, all LEDs will lit up to indicate that all output channels are working.
  • A OR B Footswitch: In A or B mode, tap the footswitch to toggle between A/B output channels.
  • A AND B Footswitch: Tap the footswitch to engage/disengage A and B mode.
  • 0°-180° Toggle: Switch to 180° to invert the phase of channel B by 180° when necessary. When you split your signal to feed two amps, sometimes it may cause phase cancellations, resulting a thin, hollow sound. If so, inverting the phase will help. Switching to 0° to keep the signal neutral

●Easy Controls
The Path Seeker features an easy-to-use interface: Each output channel has an independent volume control for detailed signal mixing, and LEDs under knobs indicate output channel working status.

●2 Working Modes
This unit features two modes: A or B mode and A and B mode. You can select an output channel in A or B mode by tapping left footswitch, or select both in A and B mode by tapping right footswitch.

●Phase Correction
When you split your signal to two amps, sometimes it may cause phase cancellations, resulting a thin, hollow sound. If so, inverting the phase will help. In this case, you can use the toggle to invert the phase of channel B by 180° when necessary.

●Carefully Selected Components
The Path Seeker is designed and built with carefully selected components to ensure best sound quality and road performance. The solid Aluminum-alloy chassis ensures touring reliability.

  • Features

    Path Seeker is a dual-mode, fully-functional ABY switcher for amps/pedalboards signal routing.

    You can route your signal to either A/B outputs, or feed it to A and B together.

    Each output channel has independent volume control for signal mixing, and a 0°-180° polarity toggle is for signal phase correction.

    1.Convenient compact size,Suitable for any music style
    2.Buffer bypass,LED indicator shows working state
    3.Two output channels with independent volume control
    4.Polarity reverse toggle (OUT B) for output signal phase correction
    5.DC 9V Adapter power supply. (plug polarity is positive on the barrel and negative in the center).(NOT INCLUDE)

  • Specifications 

    Power Requirement: 9V DC center negative
    Current Consumption: 5mA
    Dimensions: 132x64x45mm
    Weight: 235g
    Material: Aluminum alloy

  • Connections & Controls
    • IN Jack: 1/4” mono audio jack, for connecting instruments or other pedals.
    • 9V DC Jack: For power supply, use a 9-volt DC regulated by AC adapter, 500mA (plug polarity is positive on the barrel and negative in the center).
    • OUT A/B Jacks: 1/4” mono audio jacks, for connecting amps or other devices.
    • VOLA Knob: Controls the output volume of channel A (OUTA).
    • VOL B Knob: Controls the output volume of channel B (OUT B).
    • Footswitches: Use the footswitches to select an output channel or engage both output channels. This unit features two modes: A or B mode and A and B mode. In A or B mode, either LED will lit up to indicate current working channel; in A and B mode, all LEDs will lit up to indicate that all output channels are working.
    • A OR B Footswitch: In A or B mode, tap the footswitch to toggle between A/B output channels.
    • A AND B Footswitch: Tap the footswitch to engage/disengage A and B mode.
    • 0°-180° Toggle: Switch to 180° to invert the phase of channel B by 180° when necessary. When you split your signal to feed two amps, sometimes it may cause phase cancellations, resulting a thin, hollow sound. If so, inverting the phase will help. Switching to 0° to keep the signal neutral
  • Overview

    ●Easy Controls
    The Path Seeker features an easy-to-use interface: Each output channel has an independent volume control for detailed signal mixing, and LEDs under knobs indicate output channel working status.

    ●2 Working Modes
    This unit features two modes: A or B mode and A and B mode. You can select an output channel in A or B mode by tapping left footswitch, or select both in A and B mode by tapping right footswitch.

    ●Phase Correction
    When you split your signal to two amps, sometimes it may cause phase cancellations, resulting a thin, hollow sound. If so, inverting the phase will help. In this case, you can use the toggle to invert the phase of channel B by 180° when necessary.

    ●Carefully Selected Components
    The Path Seeker is designed and built with carefully selected components to ensure best sound quality and road performance. The solid Aluminum-alloy chassis ensures touring reliability.

Related Products