Donner EMO-AMP Controller Signal Converter Guitar effects pedal with MUTE FOOTSWITCH

SKU: EC1222

Country: U.S.


  • Introduction

     Are you still worrying about your neighbors’s complaints when you’re rocking loud at home? Try this EMO- AMP Controller! This tiny passive attenuator is designed for connecting to your amp’s FX Loop jacks: get connected, set a level and done.

    Do you own a really loud amp with an FX loop, or just want to be able to get that cranked tone? Then you need one of these.

  • Features

     1.High quality Electronic components and circuit design keep your tone clear and pure.Keep the dynamics and tone of your amp’s sweet spot at lower levels .

     2.True bypass.Running through the FX loop and controlling the amount of signal sent to the power section. Let you really push the front end of your amp for the natural feel and tone

     3.Easy-to-use passive attenuator. Passive design doesn’t require any power .The LED only displays whether the pedal is on or not.

     4.Set output level to minimum immediately by tapping MINIMUM footswitchOnboard knobs and switch provide flexible sound character

     5.DC 9V Adapter power supply. (plug polarity is positive on the barrel and negative in the center).(NOT INCLUDE)

    Download Product Instruction
  • Specification

     Power Requirement: 9V DC center negative

    Current Consumption: 10mA

    Dimensions: 42x93.5x52mm

    Weight: 220g


  •  Connections & Controls

     A:DC IN POWER JACK:For supplying LED only. Use a 9-volt DC regulated by AC adapter, 500mA (plug polarity is positive on the barrel and negative in the center).

    B:  LEVEL KNOB:Controls the output level.

    C:  RETURN JACK:1/4”mono audio jack,for connecting amp’s FX loop send jack.

    D:  MINIMUM FOOTSWITCH AND LED:Tap the footswitch to immediately set amp output to minimum. In this case, the LED will lit up.

    Note: connecting to amps with serial FX loop is recommended.

    E:   SEND JACK:1/4" mono audio jacks, for connecting amp’s FX loop return jack.


  •  Overview

    Rock Out At Low Volume

     The EMO-AMP Controller is a passive attenuator designed for using with your amp’s FX Loop jacks (better settle it in a serial FX loop). When you need to rock out at low volume, this will be a great help. But remember: do not set it between your amp and cabinet.


     No Power Supply Needed

     You don’t need an extra power supply for the tiny unit: connect to your amp’s FX Loop jacks, set a level and done - or tap the footswitch to immediately turn the out level to minimum. The power jack is for supplying LED onboard only.


     True Bypass

     The EMO-AMP Controller features true bypass design which keeps your sound pristine.


      Carefully Selected Components

     The EMO-AMP Controller is designed and built with carefully selected components to ensure best sound quality and road performance. The solid Aluminum-alloy chassis ensures using reliability.

Payment & Security

American Express Diners Club Discover Elo JCB Mastercard PayPal Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed